kendall shp grease

SHP Grease – Kendall Premium Semi Synthetic

SHP Premium Semi-Synthetic, Corrosion Preventative, Extreme-Pressure, Calcium Sulfonate Grease

SHP Grease is a premium-quality, semi-synthetic, multipurpose, extreme-pressure (EP) calcium sulfonate grease specially developed for use in industrial and automotive equipment operating in wet or corrosive environments. It is recommended for equipment exposed to water contamination, saltwater corrosion and/or high temperatures.

SHP Features & Benefits

  • Excellent oxidation resistance and thermal stability at high temperatures
  • Outstanding rust and corrosion protection, including resistance to saltwater corrosion
  • Excellent EP and antiwear properties
  • High load carrying capacity
  • Outstanding resistance to water washout
  • Excellent shear stability
  • NLGI GC-LB certified


  • Industrial and automotive equipment operating at high temperatures and exposed to water contamination, high humidity or corrosive environmental conditions
  • Chassis parts and wheel bearings on heavy duty and fleet equipment
  • Marine equipment, heavy mobile equipment and cables exposed to salt water
  • Paper machine wet- and dry- end bearings and hot calendar stacks
  • Rolling mills, hot roll tables, continuous casters, ingot buggies and slab mills
  • Steel mill roller bearings, conveyors and gears
  • Centralized lube systems and auto lubbers in service shops

You can check out the product data sheet here. And our grease tubes here.

Licenses & Approvals

SHP Grease is NLGI GC-LB certified for use as a multipurpose automotive wheel bearing and chassis lubricant.

Additional Details

NLGI Grade 2
Thickener Type Calcium Sulfonate
Color Tan
Texture Smooth
Density, lbs/gal 7.99
Dropping Point, °C (°F), ASTM D2265 >288 (550)
Viscosity, Kinematic, ASTM D445
Viscosity @ 40°C, cSt 150
Viscosity @ 100°C, cSt 17.0
Penetration, Worked (60 strokes), ASTM D217 265-295
Oxidation Stability, ASTM D942, 100 hours, psi (kPa) <1.0 (<6.9)
Four-Ball Wear Scar, mm, ASTM D2266 0.42
Four-Ball EP, ASTM D2596, Weld Load, Kgf 400
Timken OK Load, ASTM D2509, lbs 60
Corrosion Prevention, ASTM D1743 Pass
Copper Corrosion, ASTM D4048 1b
Water Wash-out, wt%, ASTM D1264 <1.0
Please follow and like us:

Leave a Reply

Your email address will not be published. Required fields are marked *

18 + 6 =